The PP-150 probe is a passive low-impedance attenuation probe.

The probe has been designed and calibrated for use on instruments
having an input impedance of 1M Ω paralleled by 20pF.

However, it may be recalibrated for use on instruments having an input capacitance
of 15 to 40pF.

The probe incorporation a two position(1X,10X) slide switch in the compensating
network and cable length of 1.2 meters.

The specification is as follows:
              
        CHARACTERISTICS
    Temperature 115°C to 70°C

Characteristic            Performance Requirements

Attenuation                           X1            X10
Input Capacity            85pF~115pF    18.5pF~22.5pF    
DSO Input Capacity                15pF~40pF
Input Resistance           X1:1MΩ+/-2%  X10:10MΩ+/-2%
Band width                    X1:DC-6MHz    X10:DC-100Mhz
Max input Voltage        X1:<200V DC+PeakAC
                                       X10:<600V DC+PeakAC
Probe Body                95mm
Coaxial Cable           1200mm
Weight                        55g(max)
                     

Standard Accessories:
Probe Tip----------1pcs
Ground Lead--------1pcs
Marker Ring--------2pcs
TipLocatingSleeve--1pcs
Adjustment Tool----1pcs

Attention: Please read the manual/instruction carefully before the use.