Anti-aging 110V Portable Spectrum Skin Rejuvenator Intense Pulsed light Series

I. Components of Product

●Principal machine

l Power supply system

l Microcomputer system

l Display screen

l Cooling system

●Application handpiece（Applicator）

l Intense light source --pulsed flashlamp

l Reflector/ Filter

l Sapphire Light guide crystal

II. Descriptions of Product

●    Maynice Portable--A type is composed of power supply system, microcomputer control system, cooling system, pulsed flashlamp, reflector/ filter, sapphire light guide crystal and etc. Power supply, microcomputer system, and cooling mechanism are installed in principal machine enclosure, while pulsed flashlight, reflector/filter and sapphire light guide crystal are installed in application handpiece.

●    Specifications:

Light Source: Intense pulsed flashlamp;

Output Wave Range: 530-1200nm;

Output Light Spot Size: 40×8mm²;

Energy Density: Maximum Average Value: 20J/cm²; the peak value: 40 J/cm²;

Pulse Duration: 10-35ms;

Pulse Rate: output once every 5 seconds;

Cooling Method: cooling with circulating water;

Applicable Power Source: single-phase 110V, 10A, 50/60Hz.

● Main physical parameter:

Volume of machine case: 43cm (thickness) ×41cm (width) ×46cm (height);

Weight: 23kg.

● Descriptions of every component:(See figure1-1, 1-2)

1.      Emergency Stop Switch: Press the switch when unexpected accident occurs and the whole machine is switched off. Turn the switch in the direction (clockwise) of arrow on the switch, then the switch will spring and power supply recovers.

2.      Key-switch: The machine is powered on when the key is turned to I, and it will be tuned off when the key is turned to O.

3.      Standby Key: The machine enters into standby state if this key is pressed.

4.      Ready Key: The machine enters into ready state if this key is pressed.

5.   Option Button: The parameters can be set and the computer can be reset if the button is operated.

6.        Cooling Adjustor: Used to adjust the cooling temperature of applicator. Temperature will decrease if the adjustor is turned clockwise, or, it will increase if the adjustor is turned counterclockwise. To the end of counterclockwise, cooling system will close and applicator will become normal temperature.

7.        Standby Indicator: The machine is on Standby State when the indicator is light.

8.        Ready Indicator: The machine is on Ready State when the indicator is light.

9.        Display Screen: Display working information--applicator parameter, system status, energy grade, pulse duration, output mode, working pulse quantity, and etc.

10.        Applicator: Standard Output Set 530nm-1200nm intense pulsed light.

11.    Hand-switch: Press the hand-switch for intense pulsed light emission.

12.    Footswitch Connector: Connection point for footswitch cable.

13.    Fuse Holder: Used to hold fuse tube, 10A Ф5X20.

14.    Circuit Breaker: Used to control the power of the whole machine.
Used for the connection between main machine and network power supply, and for the protection against high electric current.

15.    Electrical Outlet: Used for connection between machine and mains. Specification of plug: 10A

16.    16-1. HV Connector For Applicator: Used for electric connection between applicator and principal machine.
16-2. Applicator Cooling Electric Connector: Used for electric connection between applicator and principal machine.
16-3. Cooling Water Connection Joint for Applicator: Used for waterway connection between applicator and principal machine.
【Caution】Forbid connecting with any other equipment, otherwise damage and electric shock danger will appear.

17.    Water Filling Nozzle: Used for filling cooling water.

18.    Water Outlet Nozzle: Used for discharging cooling water.